Netopia CLI 874 Manuel d'utilisateur télécharger pdf (Page 63)

Motorola Netopia® Router CLI Commands 2-51

SDSL WAN Interface conﬁguration commands

interface sdsl id clock source { internal | network }

show interface sdsl id clock source

These commands allow you to set, change, or show the clock source associated with the SDSL WAN interface.

Note: These commands apply only to frame-based SDSL (R7100) interfaces.

SDSL WAN Interface Conﬁguration Commands

interface sdsl id clock source { internal | network }

show interface sdsl id clock source

interface sdsl id clock rate rate-speciﬁcation

show interface sdsl id clock rate

interface sdsl id operation mode { generic | lucent | nokia-eoc-fast | nokia-ﬁxed | paradyne |

nortel | newbridge } [ default ]

show interface sdsl id operation mode

interface sdsl id pvc vpi-value vci-value

show interface sdsl id pvc

interface sdsl id region { annexa | annexb }

show interface sdsl id region

interface { sdsl | isdn } id rfc1973 dlci { 16 .. 991 }

show interface { sdsl | isdn } id rfc1973 dlci

interface { sdsl | isdn } id rfc1973 enable { yes | no }

no interface ethernet { sdsl | isdn } id rfc1973 enable

show interface { sdsl | isdn } id rfc1973 enable

interface { sdsl | isdn } id rfc1973 lmi { none | lmi | ccitt | ansi | annexa | annexd }

no interface { sdsl | isdn } id rfc1973 lmi

show interface { sdsl | isdn } id rfc1973 lmi

show interface sdsl id status

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 206 207

Pas de commentaire

Netopia CLI 874 Manuel d'utilisateur Page 63